![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-073.png)
Zone variation change procedure
The difference between magnetic north
and geographical north is known as vari-
ance. In some areas, this difference can
sometimes be great enough to cause
false compass readings. Follow these in-
structions to set the variance for your par-
ticular location if this happens:
1. Push the compass switch for more
than 3 seconds. The current zone
number will appear in the display.
2. Find your current location and vari-
ance number on the zone map.
3. Push and hold the compass switch
until the new zone number appears in
the display, then release the switch.
After you release the switch, the dis-
play will show a compass direction
within a few seconds.
Inaccurate compass direction:
1. With the display turned on, push the
compass switch for 3 seconds, until a
zone selection number is displayed in
the mirror compass window.
2. Push the compass switch repeatedly
(toggle) until the correct zone is dis-
played, then release the switch.
SIC0611B
Instruments and controls
2-7
w
06.6.26/S50-D/V5.0
X