![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-023.png)
you could be thrown into it and receive
neck or other serious injuries. You could
also slide under the lap belt and receive
serious internal injuries.
O
For the most effective protection when
the vehicle is in motion, the seat should
be upright. Always sit well back in the
seat with both feet on the floor and ad-
just the seat belt properly.
Fastening the seat belts
1. Adjust the seat. See “Seats” earlier in
this section.
2. Slowly pull the seat belt out of the re-
tractor and insert the tongue into the
buckle until it clicks. (For additional
information regarding the rear center
seat belt, see “Setting center seat
belt”.)
O
The retractor is designed to lock during
a sudden stop or on impact. A slow
pulling motion will permit the belt to
move, and allow you some freedom of
movement in the seat.
O
If the seat belt cannot be pulled from
its fully retracted position, firmly pull
the belt and release it. Then smoothly
pull the belt out of the retractor.
3. Position the lap belt portion
low and
snug on the hips
as shown.
4. Pull the shoulder belt portion toward
the retractor to take up extra slack. Be
sure the shoulder belt is routed over
your shoulder and across your chest.
The front passenger and rear seat belts
have a locking mechanism for child re-
SSS0293
Rear seat
SSS0290
Front seat
SSS0291A
Rear seat
Safety — Seats, seat belts and supplemental restraint system
1-13
w
06.6.26/S50-D/V5.0
X