![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-043.png)
5. Allow the seat belt to retract. Pull up
on the shoulder belt to remove any
slack in the belt.
6. Remove any additional slack from the
child restraint; press downward and
rearward firmly in the center of the
child restraint with your hand to com-
press the vehicle seat cushion and
seatback while pulling up on the seat
belt.
7. Before placing the child in the child
restraint, hold the child restraint near
the seat belt path and use force to
push the child restraint from side to
side, and tug it forward to make sure
that it is securely held in place. It
should not move more than 1 in (25
mm). If it does move more than 1 in
(25 mm), pull again on the shoulder
belt to further tighten the child re-
straint. If you are unable to properly
secure the restraint, move the re-
straint to another rear seating position
and try again, or try a different child
restraint. Not all child restraints fit in
SSS0656
Rear facing — step 5
SSS0657
Rear facing — step 6
SSS0658
Rear facing — step 7
Safety — Seats, seat belts and supplemental restraint system
1-33
w
06.6.26/S50-D/V5.0
X