![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-085.png)
How to arm the vehicle security
system
1. Close all windows.
The system can be armed even if the win-
dows are open.
2. Remove the key from the ignition
switch.
3. Close and lock all doors and the hood.
Lock all doors by pushing the lock
button on the keyfob, Intelligent Key
or the front door handle request
switch or by using the key.
When using the remote keyless entry,
the hazard indicators will operate as
shown in “Remote keyless entry
system” or “Intelligent Key system” in
the “3. Pre-driving checks and adjust-
ments” section.
4. Confirm that the SECURITY indicator
light
q
A
comes on. The SECURITY indi-
cator light
q
A
glows for about 30 sec-
onds and then blinks. The system is
now activated. If, during this 30
second time period, the door is un-
locked by the key or the remote key-
less entry, or the ignition key is turned
to ACC or ON, the system will not be
armed.
Even when the driver and/or passengers
are in the vehicle, the system will activate
with all doors and the hood locked and ig-
nition key off. Turn the ignition key to ACC
to turn the system off.
Vehicle security system activation
The security system will give the following
alarm:
O
The headlights blink and the horn
sounds intermittently.
O
The alarm automatically turns off after
approximately 1 minute. However, the
alarm reactivates if the vehicle is tam-
pered with again. The alarm can be
shut off by unlocking a door with the
key, or by pressing the UNLOCK
button on the electronic ignition key.
The alarm is activated by:
O
Opening the door without using the
key or remote keyless entry.
O
Opening the lift gate without using the
key or remote keyless entry.
O
Opening the hood.
How to stop an activated alarm
The alarm will stop only by unlocking a
door with the key, by pressing the door
handle request switch or by pressing the
UNLOCK button on the keyfob or Intelli-
gent Key. The alarm will not stop if the ig-
nition switch is turned to ACC or ON.
SIC2153
Instruments and controls
2-19
w
06.6.26/S50-D/V5.0
X