![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-165.png)
Tire pressure information (if so
equipped)
To view “TIRE PRESSURE” information,
push the “TRIP” button repeatedly until
the “MAINTENANCE” screen is displayed.
Select “TIRE PRESSURE” using the INFINITI
controller and push the
ENTER
“
”
button.
Pressure indication in ** psi on the
screen indicates that the pressure is
being measured. After a few driving trips,
the pressure for each tire will be dis-
played randomly.
The order of tire pressure figures dis-
played on the screen does not correspond
with the actual order of the tire position.
Tire pressure rises and falls depending on
the heat caused by the vehicle’s traveling
condition and the temperature.
In case of low tire pressure, a message is
displayed on the screen:
FLAT TIRE — Check all tires.
WARNING
O
When a spare tire is mounted or a wheel
is replaced, tire pressure will not be indi-
cated, the TPMS will not function and
the low tire pressure warning light will
flash for approximately 1 minute and re-
main on after the 1 minute. Contact your
INFINITI dealer as soon as possible for
tire replacement and/or system reset-
ting.
O
Replacing tires with those not originally
specified by INFINITI could affect the
proper operation of the TPMS.
* — Refer to the separate Navigation Sys-
tem Owner’s Manual.
HOW TO USE “SETTING” BUTTON
The SETTINGS screen will appear when
the “SETTING” button is pushed.
SAA1398
SAA1322
Display screen, heater, air conditioner and audio systems
4-15
w
06.6.26/S50-D/V5.0
X