![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-028.png)
O
When attaching the rear center seat belt
connector, be certain that the seatbacks
are completely secured in the latched
position and the rear center seat belt
connector is completely secured.
O
If the rear center seat belt connector and
the seatbacks are not secured in the cor-
rect position, serious personal injury
may result in an accident or sudden
stop.
SEAT BELT EXTENDERS
If, because of body size or driving posi-
tion, it is not possible to properly fit the
lap-shoulder belt and fasten it, an ex-
tender is available. The extender adds ap-
proximately 8 in (200 mm) of length and
may be used for either the driver or front
passenger seating position. See an
INFINITI dealer for assistance if the ex-
tender is required.
WARNING
O
Only INFINITI seat belt extenders, made
by the same company which made the
original equipment seat belts, should be
used with INFINITI seat belts.
O
Adults and children who can use the
standard seat belt should not use an ex-
tender. Such unnecessary use could re-
sult in serious personal injury in the
event of an accident.
O
Never use seat belt extenders to install
child restraints. If the child restraint is
not secured properly, the child could be
seriously injured in a collision or a
sudden stop.
SEAT BELT MAINTENANCE
O
To clean the seat belt webbings,
apply
a mild soap solution or any solution
recommended for cleaning upholstery
or carpets. Then brush the webbing,
wipe it with a cloth and allow it to dry
in the shade. Do not allow the seat
belts to retract until they are com-
pletely dry.
O
If dirt builds up in the shoulder belt
guide of the seat belt anchors, the
seat belts may retract slowly. Wipe the
shoulder belt guide with a clean, dry
cloth.
O
Periodically check to see that the seat
belt and the metal components
such as
buckles, tongues, retractors, flexible
wires and anchors work properly. If
loose parts, deterioration, cuts or
other damage on the webbing is
found, the entire belt assembly should
be replaced.
1-18
Safety — Seats, seat belts and supplemental restraint system
w
06.6.26/S50-D/V5.0
X