![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-044.png)
all types of vehicles.
8. Check that the retractor is in the auto-
matic locking mode (child restraint
mode) by trying to pull more seat belt
out of the retractor. If you cannot pull
any more seat belt webbing out of the
retractor, the retractor is in the auto-
matic locking mode (child restraint
mode).
9. Check to make sure that the child re-
straint is properly secured prior to
each use. If the belt is not locked, re-
peat steps 4 through 7.
After the child restraint is removed and
the seat belt fully retracted, the automatic
locking mode (child restraint mode) is
canceled.
PRECAUTIONS ON BOOSTER SEATS
WARNING
O
Infants and small children should al-
ways be placed in an appropriate child
restraint while riding in the vehicle. Fail-
ure to use a child restraint or booster
seat can result in serious injury or death.
O
Infants and small children should never
be carried on your lap. It is not possible
for even the strongest adult to resist the
forces of a severe accident. The child
could be crushed between the adult and
parts of the vehicle. Also, do not put the
same seat belt around both your child
and yourself.
O
INFINITI recommends that the booster
seat be installed in the rear seat. Ac-
cording to accident statistics, children
are safer when properly restrained in the
rear seat than in the front seat. If you
must install a booster seat in the front
seat, see “Booster seat installation” in
this section.
O
A booster seat must only be installed in
a
seating
position
that
has
a
lap/shoulder belt. Failure to use a three-
point type seat belt with a booster seat
can result in a serious injury in sudden
stop or collision.
O
Improper use or improper installation of
a booster seat can increase the risk or
severity of injury for both the child and
other occupants of the vehicle and can
lead to serious injury or death in an
accident.
SSS0099
BOOSTER SEATS
1-34
Safety — Seats, seat belts and supplemental restraint system
w
06.6.26/S50-D/V5.0
X