![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-184.png)
It may take some time to receive the acti-
vation signal after subscribing to the XM
or SIRIUS
TM
satellite radio provider. After
receiving the activation signal, an avail-
able channel list will be automatically up-
dated in the radio. For XM , turn the igni-
tion switch from the LOCK to ACC position
to update the channel list.
Satellite radio is not available in Alaska,
Hawaii and Guam.
FM-AM-SATELLITE RADIO WITH
COMPACT DISC (CD) CHANGER
Audio main operation
For all operation precautions, see “Audio
operation precautions” earlier in this sec-
tion.
Head unit:
The radio has an FM diversity reception
system, which employs an antenna
printed on the rear window. This system
automatically switches to the antenna
which is receiving less interference.
The auto loudness circuit enhances the
low frequency range automatically in both
radio reception and CD playback.
POWER on/off:
Turn the ignition switch to the ACC or ON
position, and then push the “POWER”
on/off button while the system is off to
call up the mode (radio, CD or DVD) which
was playing immediately before the
system was turned off. When no CD or
DVD is loaded, the radio will come on.
While the system is on, pushing the
“POWER” on/off button turns the system
off.
Volume control:
Turn the volume control knob to adjust
the volume.
This vehicle has
Speed Sensitive control
Volume (SSV) for audio
. The audio volume
changes as the driving speed changes.
AUDIO knob (BASS, TREBLE, FADER,
BALANCE, SSV):
Push the AUDIO knob to change the se-
lecting mode as follows.
BASS
→
TREBLE
→
FADE
→
BALANCE
→
SSV
→
(Normal)
→
BASS
To adjust Bass, Treble, Fader and Bal-
ance, push the AUDIO knob until the de-
sired mode BASS, TREBLE, FADE or BAL-
ANCE appears in the display. Turn the AU-
DIO knob to adjust Bass, Treble, Fade or
Balance. Fade adjusts the sound level be-
tween the front and rear speakers and
Balance adjusts the sound between the
right and left speakers.
To change the SSV mode to OFF, LOW,
MID or HIGH, turn the AUDIO knob.
After 10 seconds, the radio, or CD display
reappears. Once the sound quality is set
to the desired level, push the AUDIO knob
repeatedly until the radio, or CD display
appears.
DISPLAY CHANGE:
This button will work during FM/AM radio,
satellite radio (if so equipped) and CD op-
eration. Find the detailed function in the
description of each item.
Pause/mute button (if so
equipped):
To mute or pause the audio sound, push
the “PAUSE/MUTE” button.
To release the mute or pause, push the
button again.
4-34
Display screen, heater, air conditioner and audio systems
w
06.6.26/S50-D/V5.0
X