Removing wheel cap
To remove the wheel cap, use the jack rod
covered with a cloth
q
1
as illustrated.
CAUTION
Do not use your hands to pry off wheel caps
or wheel covers. Doing so could result in per-
sonal injury.
Jacking up the vehicle and
removing the damaged tire
Carefully read the caution label attached
to the jack body and the following instruc-
tions.
1. Remove the jack holder loosening the
jack shaft.
2. Place the jack directly under the
jack-up point as illustrated above so
that top of the jack contacts the ve-
hicle at the jack up point. Align the
jack head between the two notches in
the front or the rear as shown. Also fit
the groove of the jack head between
the notches as shown.
SCE0459A
SCE0448A
Jack-up point
6-6
In case of emergency
w
06.6.26/S50-D/V5.0
X