![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-242.png)
To set at cruising speed,
accelerate your
vehicle to the desired speed, push the
SET/COAST switch and release it. (The
SET indicator light will come on.) Take
your foot off the accelerator pedal. Your
vehicle will maintain the set speed.
O
To pass another vehicle,
depress the
accelerator pedal. When you release
the pedal, the vehicle will return to
the previously set speed.
O
The vehicle may not maintain the set
speed when going up or down steep
hills. If this happens, drive without the
cruise control.
To cancel the preset speed,
follow either of
these three methods:
a) Push the cancel switch. The SET indi-
cator light will go out.
b) Tap the brake pedal. The SET indicator
light will go out.
c) Turn the main switch off. Both the
CRUISE indicator and SET indicator
lights will go out.
O
If you depress the brake pedal while
pushing the RESUME/ACCELERATE set
switch and reset at the cruising speed,
turn the main switch off once and then
turn it on again.
O
The cruise control will automatically
be cancelled if the vehicle slows down
below approximately 8 MPH (13 km/h).
O
Move the selector lever to N (Neutral)
position. The SET indicator light will
go out.
To reset at a faster cruising speed,
use one
of the following three methods:
a) Depress the accelerator pedal. When
the vehicle attains the desired speed,
push and release the SET/COAST
switch.
b) Push
and
hold
the
RESUME/
ACCELERATE set switch. When the ve-
hicle attains the speed you desire, re-
lease the switch.
c) Push,
then
quickly
release
the
RESUME/ACCELERATE set switch. Each
time you do this, the set speed will in-
crease by about 1 MPH (1.6 km/h).
To reset at a slower cruising speed,
use
one of the following three methods:
a) Lightly tap the brake pedal. When the
vehicle attains the desired speed,
push the SET/COAST switch and re-
lease it.
b) Push and hold the SET/COAST switch.
Release the switch when the vehicle
slows down to the desired speed.
c) Push, then quickly release the SET/
COAST switch. Each time you do this,
the set speed will decrease by about 1
MPH (1.6 km/h).
To resume the preset speed,
push and re-
lease
the
RESUME/ACCELERATE
set
switch. The vehicle will resume the last
set cruising speed when the vehicle
speed is over 25 MPH (40 km/h).
5-24
Starting and driving
w
06.6.26/S50-D/V5.0
X