O
Always confirm the setting in the Intelli-
gent Cruise Control system display.
O
Do not use the conventional (fixed
speed) cruise control mode when driving
under the following conditions:
- when it is not possible to keep the ve-
hicle at a set speed
- in heavy traffic or in traffic that varies
in speed
- on winding or hilly roads
- on slippery roads (rain, snow, ice,
etc.)
- in very windy area.
O
Doing so could cause a loss of vehicle
control and result in an accident.
Conventional (fixed speed) cruise
control mode display and switch
The display is located under the tachom-
eter.
1. RESUME/ACCELERATE switch:
Resumes set speed or increases speed
incrementally.
2. SET/COAST switch:
Sets the desired cruise speed, reduces
speed incrementally.
3. CANCEL switch:
Deactivates
the
system
without
erasing the set speed.
4. MAIN switch:
Master switch to activate the system
5. MAIN switch indicator light:
Indicates that the MAIN switch is ON.
6. Cruise set switch indicator light:
The light comes on while the vehicle
speed is controlled by the conven-
tional (fixed speed) cruise control
mode of the ICC system.
7. Intelligent cruise control system warn-
ing light:
The light comes on if there is a mal-
function in the cruise control system.
SSD0550
Starting and driving
5-43
w
06.6.26/S50-D/V5.0
X