![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-039.png)
straints for infants must be used in the
rear-facing direction and therefore
must not be used in the front seat.
3. Position the child restraint on the
seat. Always follow the child restraint
manufacturer’s instructions.
The back of the child restraint should
be secured against the vehicle seat-
back. If necessary, adjust or remove
the head restraint to obtain the cor-
rect child restraint fit. See “Head re-
straint adjustment” in this section.
If the head restraint is removed, store
it in a secure place. Be sure to install
the head restraint when the child re-
straint is removed.
4. Route the seat belt tongue through the
child restraint and insert it into the
buckle until you hear and feel the
latch engage. Be sure to follow the
child restraint manufacturer’s instruc-
tions for belt routing.
5. Pull the shoulder belt until the belt is
fully extended. At this time, the seat
belt retractor is in the automatic lock-
ing mode (child restraint mode). It re-
verts to emergency locking mode
when the seat belt is fully retracted.
SSS0360B
Front facing — step 4
SSS0651
Front facing — step 5
Safety — Seats, seat belts and supplemental restraint system
1-29
w
06.6.26/S50-D/V5.0
X