![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-092.png)
Headlight beam select
q
1
To select the low beam, put the lever
in the neutral position as shown.
q
2
To select the high beam, push the
lever forward. Pull it back to select the
low beam.
q
3
Pulling the lever toward you will flash
the headlight high beam.
Battery saver system
O
When the headlight switch is in the
or
position while the igni-
tion switch is in the ON position, the
lights will automatically turn off 5 min-
utes after the ignition switch has been
turned to the OFF position.
O
When the headlight switch remains in
the
or
position after the
lights automatically turn off, the lights
will turn on for 5 minutes when the
headlight switch is turned to the OFF
position and then turn to the
or
position.
CAUTION
Even though the battery saver feature auto-
matically turns off the headlights after a pe-
riod of time, you should turn the headlight
switch to the OFF position when the engine
is not running to avoid discharging the
battery.
Headlight aiming control
Depending on the number of occupants in
the vehicle and the load it is carrying, the
headlight axis may be higher than de-
sired. If the vehicle is traveling on a hilly
road, the headlights may directly hit the
rearview mirror of the vehicle ahead or
the windshield of the oncoming vehicle.
The light axis can be lowered with the op-
eration of the switch.
The larger the number designated on the
switch, the lower the axis.
SIC3122
SIC2141
2-26
Instruments and controls
w
06.6.26/S50-D/V5.0
X