![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-248.png)
cannot decelerate the vehicle quickly
enough. If this occurs, the ICC system will
sound a warning chime and blink the sys-
tem display to notify the driver to take
necessary action.
The system will cancel and a warning
chime will sound if the speed falls below
approximately 20 MPH (32 km/h). The
system will also disengage below the 20
MPH (32 km/h) cut-off speed or over the
maximum set speed.
Refer to “Approach warning” later in this
section.
The following items are controlled in the
vehicle-to-vehicle distance control mode:
O
When there are no vehicles traveling
ahead, the vehicle-to-vehicle distance
control mode maintains the speed set
by the driver. The set speed range is
between approximately 25 and 90
MPH (40 and 144 km/h).
O
When there is a vehicle traveling
ahead, the vehicle-to-vehicle distance
control mode adjusts the speed to
maintain the distance, selected by
driver, from the vehicle ahead. The ad-
justing speed range is between ap-
proximately 20 MPH (32 km/h) and up
to the set speed.
O
When the vehicle traveling ahead has
moved out from its lane of travel, the
vehicle-to-vehicle
distance
control
mode accelerates and maintains ve-
hicle speed up to the set speed.
The ICC system does not control vehicle
speed or warn you when you approach
stationary and slow moving vehicles. You
must pay attention to vehicle operation to
maintain proper distance from vehicles
ahead when approaching toll gates or
traffic congestion.
5-30
Starting and driving
w
06.6.26/S50-D/V5.0
X