![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-026.png)
WARNING
O
Always fasten the connector tongue and
the seat belt in the order shown.
O
Always make sure both the connector
tongue and the seat belt tongue are se-
cured when using the seat belt. Do not
use it with only the seat belt tongue at-
tached. This could result in serious per-
sonal injury in case of an accident or a
sudden stop.
Stowing rear center seat belt
When folding down the rear seat, the rear
center seat belt can be retracted into a
stowed position as follows:
1. Hold the connector tongue
q
1
so that
the seat belt does not retract suddenly
when the tongue is released from the
connector buckle.
2. Insert a suitable tool such as a key
q
A
into the connector buckle and release
the connector tongue.
3. Fold the connector as illustrated
q
2
.
4. Then secure the connector tongue into
the retractor base
q
3
in the ceiling.
WARNING
O
Do not unfasten the rear center seat belt
connector except when folding down the
rear seat.
O
When attaching the rear center seat belt
connector, be certain that the seatbacks
are completely secured in the latched
position and the rear center seat belt
connector is completely secured.
SSS0241
SSS0249
1-16
Safety — Seats, seat belts and supplemental restraint system
w
06.6.26/S50-D/V5.0
X