![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-036.png)
Rear-facing
Follow these steps to install a rear-facing
child restraint using LATCH System:
1. Adjust the seatback so that it is up-
right.
O
Do not move the rear seatbacks with
the child restraints attached to them.
2. Position the child restraint on the
seat. Always follow the child restraint
manufacturer’s instructions.
3. Secure the child restraint anchor at-
tachments to the LATCH lower an-
chors.
4. For child restraints that are equipped
with webbing mounted attachments,
remove any additional slack from the
anchor attachments. Press downward
and rearward firmly in the center of
the child restraint with your hand to
compress the vehicle seat cushion and
seatback while tightening the webbing
of the anchor attachments.
SSS0648
Rear facing — step 3
SSS0649
Rear facing — step 3
SSS0639
Rear facing — step 4
1-26
Safety — Seats, seat belts and supplemental restraint system
w
06.9.11/S50-D/V5.0
X