![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-024.png)
straint installation. It is referred to as the
automatic locking mode.
When the locking mechanism is activated
the seat belt cannot be extended again
until the seat belt tongue is detached
from the buckle and fully retracted. For
additional information, see “Child re-
straints” later in this section.
The automatic locking mode should be
used only for child restraint installation.
During normal seat belt use by a pas-
senger, the locking mode should not be ac-
tivated. If it is activated it may cause un-
comfortable seat belt tension. It can also
change the operation of the front pas-
senger air bag. See “Front passenger air
bag and status light” later in this section.
WARNING
When fastening the seat belts, be certain
that the seatbacks are completely secured
in the latched position. If they are not com-
pletely secured, passengers may be injured
in an accident or sudden stop.
Unfastening the seat belts
To unfasten the belt, press the button on
the buckle. The seat belt will automati-
cally retract.
Checking seat belt operation
Your seat belt retractors are designed to
lock belt movement using two separate
methods:
O
when the belt is pulled quickly from
the retractor.
O
when the vehicle slows down rapidly.
To increase your confidence in the seat
belts, check the operation as follows:
O
grasp the shoulder belt and pull
quickly forward. The retractor should
lock and restrict further belt move-
ment.
If the retractor does not lock during this
check or if you have any questions about
belt operation, see an INFINITI dealer.
SSS0326
1-14
Safety — Seats, seat belts and supplemental restraint system
w
06.6.26/S50-D/V5.0
X