![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-025.png)
Shoulder belt height adjustment
(for front seats)
The shoulder belt anchor height should
be adjusted to the position best suited for
you. (See “Precautions on seat belt
usage” earlier in this section.) To adjust,
pull the release button
q
A
, and then move
the shoulder belt anchor to the desired
position, so that the belt passes over the
center of the shoulder. The belt should be
away from your face and neck, but not
falling off of your shoulder. Release the
adjustment button to lock the shoulder
belt anchor into position.
WARNING
O
After adjustment, release the adjust-
ment button and try to move the
shoulder belt anchor up and down to
make sure it is securely fixed in position.
O
The shoulder belt anchor height should
be adjusted to the position best for you.
Failure to do so may reduce the effective-
ness of the entire restraint system and
increase the chance or severity of injury
in an accident.
REAR CENTER SEAT BELT
The rear center seat belt has a connector
tongue
q
1
and a seat belt tongue
q
2
.
Both the connector tongue and the seat
belt tongue must be securely latched for
proper seat belt operation.
SSS0351
SSS0240
Safety — Seats, seat belts and supplemental restraint system
1-15
w
06.6.26/S50-D/V5.0
X