![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-087.png)
If INFINITI Vehicle Immobilizer System is
malfunctioning, this light will remain on
while the ignition switch is in the ON po-
sition.
If the light still remains on and/or the en-
gine will not start, see an INFINITI dealer
for INFINITI Vehicle Immobilizer System
service as soon as possible. Please bring
all electronic ignition keys that you have
when visiting an INFINITI dealer for service.
The windshield wiper and washer oper-
ates when the ignition switch is in the ON
position.
Push the lever down to operate the wiper
at the following speed:
q
1
Intermittent (INT) — intermittent opera-
tion can be adjusted by turning the
knob toward
q
A
(Slower) or
q
B
(Faster).
Also, the intermittent operation speed
varies in accordance with the vehicle
speed. (For example, when the vehicle
speed is high, the intermittent opera-
tion speed will be faster.) You can
switch this function on and off manu-
ally. See “How to use the SETTING but-
ton” in the “4. Display screen, heater,
air conditioner and audio systems”
section.
q
2
Low (LO) — continuous low speed op-
eration
q
3
High (HI) — continuous high speed op-
eration
Push the lever up
q
4
to have one sweep
operation (MIST) of the wiper.
Pull the lever toward you
q
5
to operate
the washer. Then the wiper will also oper-
ate several times.
WARNING
In freezing temperatures the washer solu-
tion may freeze on the windshield and ob-
scure your vision which may lead to an acci-
dent. Warm the windshield with the de-
froster before you wash the windshield.
SIC3037
WINDSHIELD WIPER AND WASHER SWITCH
Instruments and controls
2-21
w
06.6.26/S50-D/V5.0
X