![background image](/i/infiniti/147943/infiniti-fx35-2007-fx45-2007/h/infiniti-fx35-2007-fx45-2007-283.png)
The jack should be used on level firm
ground.
3. Loosen each wheel nut one or two
turns by turning counterclockwise with
the wheel nut wrench.
Do not remove
the wheel nuts until the tire is off the
ground.
4. Carefully raise the vehicle until the tire
clears the ground. To lift the vehicle,
securely hold the jack lever and rod
with both hands as shown above. Re-
move the wheel nuts, and then re-
move the tire.
WARNING
O
Don’t use the jack with the holder at-
tached in case it breaks, or it could lead
to a personal injury.
O
Never get under the vehicle while it is
supported only by the jack. If it is neces-
sary to work under the vehicle, support it
with safety stands.
O
Use only the jack provided with your ve-
hicle to lift the vehicle. Do not use the
jack provided with other vehicles to your
vehicle.
The jack is designed only for lifting your
vehicle during a tire change.
O
Use the correct jack-up points. Never
use any other part of the vehicle for jack
support.
O
Never jack up the vehicle more than nec-
essary.
O
Never use blocks on or under the jack.
O
Do not start or run the engine while ve-
hicle is on the jack. It may cause the ve-
hicle to move. This is especially true for
vehicles with limited slip differentials.
O
Do not allow passengers to stay in the
vehicle while it is on the jack.
SCE0458A
In case of emergency
6-7
w
06.6.26/S50-D/V5.0
X