Prestige 334 User’s Guide
99
Chapter 7 Network Address Translation (NAT) Screens
7.6.2 Two Points To Remember About Trigger Ports
1
Trigger events only happen on data that is going coming from inside the Prestige and
going to the outside.
2
If an application needs a continuous data stream, that port (range) will be tied up so that
another computer on the LAN can’t trigger it.
7.7 Configuring Trigger Port Forwarding
To change your Prestige’s trigger port settings, click
SUA/NAT
and the
Trigger Port
tab. The
screen appears as shown.
Figure 34
Trigger Port
The following table describes the labels in this screen.
Note:
Only one LAN computer can use a trigger port (range) at
a time
Table 27
Trigger Port
LABEL
DESCRIPTION
#
This is the rule index number (read-only).
Name
Type a unique name (up to 15 characters) for identification purposes. All characters
are permitted - including spaces.