Prestige 334 User’s Guide
299
Chapter 31 System Maintenance
31.1.2 Command Usage
A list of commands can be found by typing
help
or
?
at the command prompt. Always type
the full command. Type
exit
to return to the SMT main menu when finished.
Figure 166
Valid Commands
31.2 Call Control Support
The Prestige provides two call control functions: budget management and call history. Please
note that this menu is only applicable when
Encapsulation
is set to
PPPoE
in menu 4 or
menu 11.1.
The budget management function allows you to set a limit on the total outgoing call time of
the Prestige within certain times. When the total outgoing call time exceeds the limit, the
current call will be dropped and any future outgoing calls will be blocked.
To access the call control menu, select option 9 in menu 24 to go to
Menu 24.9 — System
Maintenance — Call Control
, as shown in the next table.
Figure 167
Menu 24.9 System Maintenance : Call Control
31.2.1 Budget Management
Menu 24.9.1 shows the budget management statistics for outgoing calls. Enter 1 from
Menu
24.9 - System Maintenance - Call Control
to bring up the following menu.
Copyright (c) 1994 - 2004 ZyXEL Communications Corp.
P334> ?
Valid commands are:
sys exit device ether
poe pptp config ip
ipsec ppp
P334>
Menu 24.9 - System Maintenance - Call Control
1. Budget Management
2. Call History
Enter Menu Selection Number: