Prestige 334 User’s Guide
Chapter 34 VPN/IPSec Setup
324
34.4.0.1 Active Protocol
This field is a combination of mode and security protocols used for the VPN. See the Web
Configurator part on VPN for more information on these parameters.
34.4.0.2 Security Parameter Index (SPI)
To edit this menu, move the cursor to the
Edit Manual Setup
field in
Menu 27.1.1 – IPSec
Setup
press
[SPACE BAR]
to select
Yes
and then press
[ENTER]
to go to
Menu 27.1.1.2 –
Manual Setup
.
Figure 181
Menu 27.1.1.2 Manual Setup
The following table describes the fields in this menu.
Table 107
Active Protocol: Encapsulation and Security Protocol
MODE
SECURITY PROTOCOL
Tunnel
ESP
Transport
AH
Menu 27.1.1.2 – Manual Setup
Active Protocol= ESP Tunnel
ESP Setup
SPI (Decimal)=
Encryption Algorithm= DES
Key1=
Key2= N/A
Key3= N/A
Authentication Algorithm= MD5
Key= N/A
AH Setup
SPI (Decimal)= N/A
Authentication Algorithm= N/A
Key=
Press ENTER to Confirm or ESC to Cancel:
Table 108
Menu 27.1.1.2 Manual Setup
FIELD
DESCRIPTION
Active Protocol Press [SPACE BAR] to choose from
ESP Tunnel
,
ESP Transport
,
AH Tunnel
or
AH
Transport
and then press [ENTER]. Choosing an
ESP
combination causes the
AH
Setup
fields to be non-applicable (
N/A
)
ESP Setup
The
ESP Setup
fields are
N/A
if you chose an
AH
Active Protocol
.
SPI (Decimal) The
SPI
must be unique and from one to four integers ("0" to "9").