Prestige 334 User’s Guide
Chapter 17 Maintenance
192
17.2.1 System Statistics
Read-only information here includes port status and packet specific statistics. Also provided
are "system up time" and "poll interval(s)". The
Poll Interval(s)
field is configurable.
Figure 75
Maintenance System Statistics
The following table describes the labels in this screen.
17.3 DHCP Table Screen
DHCP (Dynamic Host Configuration Protocol, RFC 2131 and RFC 2132) allows individual
clients to obtain TCP/IP configuration at start-up from a server. You can configure the Prestige
as a DHCP server or disable it. When configured as a server, the Prestige provides the TCP/IP
configuration for the clients. If set to
None
, DHCP service will be disabled and you must have
another DHCP server on your LAN, or else the computer must be manually configured.
Table 60
Maintenance System Statistics
LABEL
DESCRIPTION
Port
This is the WAN, LAN port.
Status
This displays the port speed and duplex setting if you're using Ethernet
encapsulation and
down
(line is down),
idle
(line (ppp) idle),
dial
(starting to trigger
a call) and
drop
(dropping a call) if you're using PPPoE encapsulation.
TxPkts
This is the number of transmitted packets on this port.
RxPkts
This is the number of received packets on this port.
Collisions
This is the number of collisions on this port.
Tx B/s
This displays the transmission speed in bytes per second on this port.
Rx B/s
This displays the reception speed in bytes per second on this port.
Up Time
This is the total amount of time the line has been up.
System Up Time
This is the total time the Prestige has been on.
Poll Interval(s)
Enter the time interval for refreshing statistics in this field.
Set Interval
Click this button to apply the new poll interval you entered in the
Poll Interval(s)
field.
Stop
Click
Stop
to stop refreshing statistics, click
Stop
.