Prestige 334 User’s Guide
Chapter 21 Menu 3 LAN Setup
216
IP Subnet Mask
Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the subnet
mask computed by the Prestige.
RIP Direction
Press [SPACE BAR] and then [ENTER] to select the RIP direction. Options are
Both
,
In
Only,
Out Only
or
None
.
Version
Press [SPACE BAR] and then [ENTER] to select the RIP version. Options are
RIP-
1
,
RIP-2B
or
RIP-2M
.
Incoming Protocol
Filters
Enter the filter set(s) you wish to apply to the incoming traffic between this node
and the Prestige.
Outgoing Protocol
Filters
Enter the filter set(s) you wish to apply to the outgoing traffic between this node
and the Prestige.
When you have completed this menu, press [ENTER] at the prompt [Press ENTER to Confirm…] to
save your configuration, or press [ESC] at any time to cancel.
Table 70
Menu 3.2.1: IP Alias Setup
FIELD
DESCRIPTION