Prestige 334 User’s Guide
165
Chapter 15 VPN Screens
IPSec Keying Mode Select
IKE
or
Manual
from the drop-down list box.
IKE
provides more protection
so it is generally recommended.
Manual
is a useful option for troubleshooting.
Local Address
The local IP address must be static and correspond to the remote IPSec router's
configured remote IP addresses.
Two active SAs can have the same local or remote IP address, but not both. You
can configure multiple SAs between the same local and remote IP addresses, as
long as only one is active at any time.
Remote Address
Start
Remote IP addresses must be static and correspond to the remote IPSec
router's configured local IP addresses. The remote address fields do not apply
when the
Secure Gateway Address
field is configured to
0.0.0.0
. In this case
only the remote IPSec router can initiate the VPN.
Two active SAs cannot have the local and remote IP address(es) both the same.
Two active SAs can have the same local or remote IP address, but not both. You
can configure multiple SAs between the same local and remote IP addresses, as
long as only one is active at any time.
Enter a (static) IP address on the network behind the remote IPSec router.
Remote Address
End/Mask
When the remote IP address is a single address, type it a second time here.
When the remote IP address is a range, enter the end (static) IP address, in a
range of computers on the network behind the remote IPSec router.
When the remote IP address is a subnet address, enter a subnet mask on the
network behind the remote IPSec router.
DNS Server (for
IPSec VPN)
If there is a private DNS server that services the VPN, type its IP address here.
The Prestige assigns this additional DNS server to the Prestige’s DHCP clients
that have IP addresses in this IPSec rule's range of local addresses. A DNS
server allows clients on the VPN to find other computers and servers on the VPN
by their (private) domain names.
My IP Address
Enter the WAN IP address of your Prestige. The Prestige uses its current WAN
IP address (static or dynamic) in setting up the VPN tunnel if you leave this field
as
0.0.0.0
.
The VPN tunnel has to be rebuilt if this IP address changes.
Local ID Type
Select
IP
to identify this Prestige by its IP address.
Select
DNS
to identify this Prestige by a domain name.
Select
to identify this Prestige by an e-mail address.
Local Content
When you select
IP
in the
Local ID Type
field, type the IP address of your
computer in the local
Content
field. The Prestige automatically uses the IP
address in the
My IP Address
field (refer to the
My IP Address
field description)
if you configure the local
Content
field to
0.0.0.0
or leave it blank.
It is recommended that you type an IP address other than
0.0.0.0
in the local
Content
field or use the
DNS
or
ID type in the following situations.
When there is a NAT router between the two IPSec routers.
When you want the remote IPSec router to be able to distinguish between VPN
connection requests that come in from IPSec routers with dynamic WAN IP
addresses.
When you select
DNS
or
in the
Local ID Type
field, type a domain name
or e-mail address by which to identify this Prestige in the local
Content
field. Use
up to 31 ASCII characters including spaces, although trailing spaces are
truncated. The domain name or e-mail address is for identification purposes only
and can be any string.
Table 51
VPN: Rule Setup (Basic)
LABEL
DESCRIPTION