Prestige 334 User’s Guide
317
Chapter 34 VPN/IPSec Setup
Remote Addr
End
When the
Addr Type
field in
Menu 27.1.1 IPSec Setup
is configured to
Single
, this is
the same (static) IP address as in the
Remote Addr Start
field.
When the
Addr Type
field in
Menu 27.1.1 IPSec Setup
is configured to
Range
, this is
the end (static) IP address, in a range of computers on the network behind the remote
IPSec router.
When the
Addr Type
field in
Menu 27.1.1 IPSec Setup
is configured to
SUBNET
, this
is a subnet mask on the network behind the remote IPSec router.
This field displays
N/A
when you configure the
Secure Gateway Addr
field in SMT
27.1.1 to 0.0.0.0.
Secure GW
Addr
This is the WAN IP address or the domain name (up to the first 15 characters are
displayed) of the IPSec router with which you are making the VPN connection. This field
displays
0.0.0.0
when you configure the
Secure Gateway Addr
field in SMT 27.1.1 to
0.0.0.0.
Select
Command
Press [SPACE BAR] to choose from
None
,
Edit
,
Delete
,
Go To Rule
,
Next Page
or
Previous Page
and then press [ENTER]. You must select a rule in the next field when
you choose the
Edit
, Delete or
Go To
commands.
Select
None
and then press [ENTER]
to go to the “Press ENTER to Confirm…” prompt.
Use
Edit
to create or edit a rule. Use
Delete
to remove a rule. To edit or delete a rule,
first make sure you are on the correct page. When a VPN rule is deleted, subsequent
rules do not move up in the page list.
Use
Go To Rule
to view the page where your desired rule is listed.
Select
Next Page
or
Previous Page
to view the next or previous page of rules
(respectively).
Select Rule
Type the VPN rule index number you wish to edit or delete and then press [ENTER].
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Table 104
Menu 27.1 IPSec Summary
FIELD
DESCRIPTION