Prestige 334 User’s Guide
237
Chapter 25 Network Address Translation (NAT)
Figure 111
Menu 4 Applying NAT for Internet Access
The following figure shows how you apply NAT to the remote node in menu 11.1.
1
Enter 11 from the main menu.
2
When menu 11 appears, as shown in the following figure, type the number of the remote
node that you want to configure.
3
Move the cursor to the
Edit IP
field, press
[SPACE BAR]
to select
Yes
and then press
[ENTER]
to bring up
Menu 11.3 - Remote Node Network Layer Options.
Menu 4 - Internet Access Setup
ISP's Name= MyISP
Encapsulation= Ethernet
Service Type= Standard
My Login= N/A
My Password= N/A
Retype to Confirm= N/A
Login Server= N/A
Relogin Every (min)= N/A
IP Address Assignment= Dynamic
IP Address= N/A
IP Subnet Mask= N/A
Gateway IP Address= N/A
Network Address Translation= SUA Only
Press ENTER to Confirm or ESC to Cancel: