Prestige 334 User’s Guide
Chapter 3 Wizard Setup
46
Figure 6
Wizard 2: Ethernet Encapsulation
The following table describes the labels in this screen.
Table 2
Wizard 2: Ethernet Encapsulation
LABEL
DESCRIPTION
ISP Parameters for Internet Access
Encapsulation
You must choose the
Ethernet
option when the WAN port is used as a regular
Ethernet. Otherwise, choose
PPP over Ethernet
or
PPTP
for a dial-up connection.
Service Type
Choose from
Standard
,
Telstra
(RoadRunner Telstra authentication method),
RR-
Manager
(Roadrunner Manager authentication method),
RR-Toshiba
(Roadrunner Toshiba authentication method) or
Telia Login
.
The following fields are not applicable (
N/A
) for the
Standard
service type.
User Name
Type the user name given to you by your ISP.
Password
Type the password associated with the user name above.
Login Server IP
Address
Type the authentication server IP address here if your ISP gave you one.
Login Server
This field only applies when you select
Telia Login
in the
Service Type
field. Type
the domain name of the Telia login server, for example “login1.telia.com”.
Relogin Every
(min)
This field only applies when you select
Telia Login
in the
Service Type
field. The
Telia server logs the Prestige out if the Prestige does not log in periodically. Type
the number of minutes from 1 to 59 (30 default) for the Prestige to wait between
logins.
Back
Click
Back
to return to the previous screen.
Next
Click
Next
to continue.