Prestige 334 User’s Guide
Chapter 20 Menu 2 WAN Setup
210
C
H A P T E R
20
Menu 2 WAN Setup
This chapter describes how to configure the WAN using menu 2.
20.1 Introduction to WAN
This chapter explains how to configure settings for your WAN port.
20.2 WAN Setup
From the main menu, enter 2 to open menu 2.
Figure 93
Menu 2 WAN Setu
The following table describes the fields in this menu.
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 67
Menu 2 WAN Setup
FIELD
DESCRIPTION
MAC Address
Assigned By
Press [SPACE BAR] and then [ENTER] to choose one of two methods to assign a
MAC Address. Choose
Factory Default
to select the factory assigned default
MAC Address. Choose
IP address attached on LAN
to use the MAC Address of
that computer whose IP you give in the following field.
IP Address
This field is applicable only if you choose the
IP address attached on LAN
method in the
Assigned By
field. Enter the IP address of the computer on the
LAN whose MAC you are cloning.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.