Prestige 334 User’s Guide
97
Chapter 7 Network Address Translation (NAT) Screens
Figure 32
Address Mapping Edit
The following table describes the labels in this screen.
Table 26
Address Mapping Edit
LABEL
DESCRIPTION
Type
Choose the port mapping type from one of the following.
1.
One-to-One
: One-to-one mode maps one local IP address to one global IP
address. Note that port numbers do not change for One-to-one NAT mapping
type.
2.
Many-to-One
: Many-to-One mode maps multiple local IP addresses to one
global IP address. This is equivalent to SUA (i.e., PAT, port address translation),
ZyXEL's Single User Account feature.
3.
Many-to-Many Overload
: Many-to-Many Overload mode maps multiple local
IP addresses to shared global IP addresses.
4.
Many One-to-One
: Many One-to-one mode maps each local IP address to
unique global IP addresses.
5.
Server
: This type allows you to specify inside servers of different services
behind the NAT to be accessible to the outside world.
Local Start IP
This is the starting Inside Local IP Address (ILA). Local IP addresses are
N/A
for
Server
port mapping.
Local End IP
This is the end Inside Local IP Address (ILA). If your rule is for all local IP
addresses, then enter 0.0.0.0 as the
Local Start IP
address and
255.255.255.255 as the
Local End IP
address.
This field is
N/A
for
One-to-One
and
Server
mapping types.
Global Start IP
This is the starting Inside Global IP Address (IGA). Enter 0.0.0.0 here if you have
a dynamic IP address from your ISP.
Global End IP
This is the ending Inside Global IP Address (IGA). This field is
N/A
for
One-to-
One
,
Many-to-One
and
Server
mapping types.
Apply
Click
Apply
to save your changes back to the Prestige.
Cancel
Click
Cancel
to return to the previous screen and not save your changes.