Prestige 334 User’s Guide
325
Chapter 34 VPN/IPSec Setup
Encryption
Algorithm
Press [SPACE BAR] to choose from
NULL
,
3DES
or
DES
and then press [ENTER].
Fill in the
Key1
field below when you choose
DES
and fill in fields
Key1
to
Key3
when
you choose
3DES
. Select
NULL
to set up a tunnel without encryption. When you
select
NULL
, you do not enter any encryption keys.
Key1 Enter a unique eight-character key. Any character may be used, including spaces, but
trailing spaces are truncated.
Fill in the
Key1
field when you choose
DES
and fill in fields
Key1
to
Key3
when you
choose
3DES
.
Key2 Enter a unique eight-character key. It can be comprised of any character including
spaces (but trailing spaces are truncated).
Key3 Enter a unique eight-character key. It can be comprised of any character including
spaces (but trailing spaces are truncated).
Authentication
Algorithm
Press [SPACE BAR] to choose from
MD5
or
SHA1
and then press [ENTER].
Key Enter the authentication key to be used by IPSec if applicable. The key must be
unique. Enter 16 characters for
MD5
authentication and 20 characters for
SHA-1
authentication. Any character may be used, including spaces, but trailing spaces are
truncated.
AH Setup
The
AH Setup
fields are
N/A
if you chose an
ESP
Active Protocol
.
SPI (Decimal) The
SPI
must be from one to four unique decimal characters ("0" to "9") long.
Authentication
Algorithm
Press [SPACE BAR] to choose from
MD5
or
SHA1
and then press [ENTER].
Key Enter the authentication key to be used by IPSec if applicable. The key must be
unique. Enter 16 characters for
MD5
authentication and 20 characters for
SHA-1
authentication. Any character may be used, including spaces, but trailing spaces are
truncated.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Table 108
Menu 27.1.1.2 Manual Setup
FIELD
DESCRIPTION