Prestige 334 User’s Guide
225
Chapter 23 Remote Node Configuration
Figure 102
Menu 11.1 Remote Node Profile for Ethernet Encapsulation
The following table describes the fields in this menu.
Menu 11.1 - Remote Node Profile
Rem Node Name= MyISP Route= IP
Active= Yes
Encapsulation= Ethernet Edit IP= No
Service Type= Standard Session Options:
Service Name= N/A Edit Filter Sets= No
Outgoing:
My Login= N/A
My Password= N/A Edit Traffic Redirect= No
Retype to Confirm= N/A
Server= N/A
Relogin Every (min)= N/A
Press ENTER to Confirm or ESC to Cancel:
Table 74
Menu 11.1 Remote Node Profile for Ethernet Encapsulation
FIELD
DESCRIPTION
Rem Node Name
Enter a descriptive name for the remote node. This field can be up to eight
characters.
Active
Press [SPACE BAR] and then [ENTER] to select
Yes
(activate remote node) or
No
(deactivate remote node).
Encapsulation
Ethernet
is the default encapsulation. Press [SPACE BAR] and then [ENTER] to
change to
PPPoE
or
PPTP
encapsulation.
Service Type
Press [SPACE BAR] and then [ENTER] to select from
Standard
,
RR-Toshiba
(RoadRunner Toshiba authentication method),
RR-Manager
(RoadRunner
Manager authentication method),
RR-Telstra
or
Telia Login
. Choose one of the
RoadRunner methods if your ISP is Time Warner's RoadRunner; otherwise
choose
Standard
.
Outgoing
My Login
This field is applicable for
PPPoE
encapsulation only. Enter the login name
assigned by your ISP when the Prestige calls this remote node. Some ISPs
append this field to the
Service Name
field above (e.g., jim@poellc) to access the
PPPoE server.
My Password
Enter the password assigned by your ISP when the Prestige calls this remote
node. Valid for
PPPoE
encapsulation only.
Retype to Confirm
Type your password again to make sure that you have entered it correctly.
Server
This field is valid only when
RoadRunner
is selected in the
Service Type
field.
The Prestige will find the RoadRunner Server IP automatically if this field is left
blank. If it does not, then you must enter the authentication server IP address
here.
Relogin Every
(min)
This field is available when you select
Telia Login
in the
Service Type
field.
The Telia server logs the Prestige out if the Prestige does not log in periodically.
Type the number of minutes from 1 to 59 (30 recommended) for the Prestige to
wait between logins.
Route
This field refers to the protocol that will be routed by your Prestige – IP is the only
option for the Prestige.