Prestige 334 User’s Guide
103
Chapter 8 Static Route Screens
Figure 36
Static Route
The following table describes the labels in this screen.
8.2.1 Configuring Route Entry
Select a static route index number and click
Edit
. The screen shown next appears. Fill in the
required information for each static route.
Table 28
Static Route
LABEL
DESCRIPTION
#
Number of an individual static route.
Name
Name that describes or identifies this route.
Active
This field shows whether this static route is active (
Yes
) or not (
No
).
Destination
This parameter specifies the IP network address of the final destination. Routing is
always based on network number.
Gateway
This is the IP address of the gateway. The gateway is an immediate neighbor of
your Prestige that will forward the packet to the destination. On the LAN, the
gateway must be a router on the same segment as your Prestige; over the WAN,
the gateway must be the IP address of one of the remote nodes.
Edit
Select a static route index number and then click
Edit
to set up a static route on the
Prestige.