Prestige 334 User’s Guide
Chapter 13 Remote Management Screens
142
13.5 Configuring FTP
You can upload and download the Prestige’s firmware and configuration files using FTP,
please see the chapter on firmware and configuration file maintenance
for details. To use this
feature, your computer must have an FTP client.
To change your Prestige’s FTP settings, click
REMOTE MGMT
, then the
FTP
tab. The
screen appears as shown.
Figure 51
Remote Management: FTP
The following table describes the labels in this screen.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 39
Remote Management: Telnet
LABEL
DESCRIPTION
Table 40
Remote Management: FTP
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the Prestige using
this service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Prestige using this service.
Select
All
to allow any computer to access the Prestige using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the Prestige using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.