Prestige 334 User’s Guide
141
Chapter 13 Remote Management Screens
Figure 49
Telnet Configuration on a TCP/IP Network
13.4 Configuring TELNET
Click
REMOTE MGMT
and the
TELNET
tab to display the screen as shown.
Figure 50
Remote Management: Telnet
The following table describes the labels in this screen.
Table 39
Remote Management: Telnet
LABEL
DESCRIPTION
Server Port
You may change the server port number for a service if needed, however you must
use the same port number in order to use that service for remote management.
Server Access
Select the interface(s) through which a computer may access the Prestige using this
service.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Prestige using this service.
Select
All
to allow any computer to access the Prestige using this service.
Choose
Selected
to just allow the computer with the IP address that you specify to
access the Prestige using this service.