Prestige 334 User’s Guide
Chapter 13 Remote Management Screens
146
13.7 Configuring DNS
Use DNS (Domain Name System) to map a domain name to its corresponding IP address and
vice versa. Refer to the chapter on Wizard Setup for background information.
To change your Prestige’s DNS settings, click
REMOTE MGMT
, then the
DNS
tab. The
screen appears as shown.
Figure 54
Remote Management: DNS
The following table describes the labels in this screen.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to communicate with the
Prestige using this service.
Select
All
to allow any computer to access the Prestige using this service.
Choose
Selected
to just allow the computer with the IP address that you specify
to access the Prestige using this service.
Apply
Click
Apply
to save your customized settings and exit this screen.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 42
Remote Management: SNMP
LABEL
DESCRIPTION
Table 43
Remote Management: DNS
LABEL
DESCRIPTION
Server Port
The DNS service port number is 53 and cannot be changed here.
Server Access
Select the interface(s) through which a computer may send DNS queries to the
Prestige.
Secured Client IP
Address
A secured client is a “trusted” computer that is allowed to send DNS queries to the
Prestige.
Select
All
to allow any computer to send DNS queries to the Prestige.
Choose
Selected
to just allow the computer with the IP address that you specify to
send DNS queries to the Prestige.