Prestige 334 User’s Guide
321
Chapter 34 VPN/IPSec Setup
34.3 IKE Setup
To edit this menu, the
Key Management
field in
Menu 27.1.1 – IPSec Setup
must be set to
IKE
. Move the cursor to the
Edit Key Management Setup
field in
Menu 27.1.1 – IPSec
Setup
; press
[SPACE BAR]
to select
Yes
and then press
[ENTER]
to display
Menu 27.1.1.1
– IKE Setup
.
Enable Replay
Detection
As a VPN setup is processing intensive, the system is vulnerable to Denial of Service
(DoS) attacks The IPSec receiver can detect and reject old or duplicate packets to pro-
tect against replay attacks. Enable replay detection by setting this field to
Yes
.
Press [SPACE BAR] to select
Yes
or
No
. Choose
Yes
and press [ENTER] to enable
replay detection.
Key
Management
Press [SPACE BAR] to choose either
IKE
or
Manual
and then press [ENTER].
Manual
is useful for troubleshooting if you have problems using
IKE
key management.
Edit Key
Management
Setup
Press [SPACE BAR] to change the default
No
to
Yes
and then press [ENTER] to go to
a key management menu for configuring your key management setup (described
later). If you set the
Key Management
field to
IKE
, this will take you to
Menu 27.1.1.1
– IKE Setup
. If you set the
Key Management
field to
Manual
, this will take you to
Menu 27.1.1.2 – Manual Setup
.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to
save your configuration, or press [ESC] at any time to cancel.
Table 105
Menu 27.1.1 IPSec Setup
FIELD
DESCRIPTION