Prestige 334 User’s Guide
Chapter 15 VPN Screens
176
Figure 67
Setup: Manual
The following table describes the labels in this screen.
Table 53
Rule Setup: Manual
LABEL
DESCRIPTION
Active
Select this check box to activate this VPN policy.
IPSec Keying Mode
Select
IKE
or
Manual
from the drop-down list box.
Manual
is a useful option
for troubleshooting if you have problems using
IKE
key management.
Protocol Number
Enter 1 for ICMP, 6 for TCP, 17 for UDP, etc. 0 is the default and signifies any
protocol.
Local Address
The Local IP address must be static and correspond to the remote IPSec
router's configured remote IP addresses.
Two active SAs can have the same local or remote IP address, but not both.
You can configure multiple SAs between the same local and remote IP
addresses, as long as only one is active at any time.
Local Port Start
"0" is the default and signifies any port. Type a port number from 0 to 65535.
Some of the most common IP ports are: 21, FTP; 53, DNS; 23, Telnet; 80,
HTTP; 25, SMTP; 110, POP3.