Prestige 334 User’s Guide
Chapter 7 Network Address Translation (NAT) Screens
94
Figure 30
SUA/NAT Setup
The following table describes the labels in this screen.
Table 24
SUA/NAT Setup
LABEL
DESCRIPTION
Default Server
In addition to the servers for specified services, NAT supports a default server. A
default server receives packets from ports that are not specified in this screen.
If you do not assign a
Default Server
IP Address, the Prestige discards all packets
received for ports that are not specified in this screen or remote management.
#
Number of an individual SUA server entry.
Active
Select this check box to enable the SUA server entry. Clear this checkbox to
disallow forwarding of these ports to an inside server without having to delete the
entry.
Name
Enter a name to identify this port-forwarding rule.
Start Port
Enter a port number here. To forward only one port, enter it again in the
End Port
field. To specify a range of ports, enter the last port to be forwarded in the
End Port
field.
End Port
Server IP
Address
Enter the inside IP address of the server here.
Apply
Click
Apply
to save your changes back to the Prestige.
Reset
Click
Reset
to begin configuring this screen afresh.