Prestige 334 User’s Guide
Chapter 6 WAN Screens
78
6.5 Configuring WAN IP
To change your Prestige’s WAN IP settings, click
WAN
, then the
WAN IP
tab.
This screen
varies according to the type of encapsulation you select.
If your ISP did
not
assign you a fixed IP address, click
Get automatically from ISP
(Default
);otherwise click
Use fixed IP Address
and enter the IP address in the field provided.
Retype to Confirm
Type your password again to make sure that you have entered is correctly.
Nailed-up Connection
Select
Nailed-Up Connection
if you do not want the connection to time out.
Idle Timeout
This value specifies the time in seconds that elapses before the Prestige
automatically disconnects from the PPTP server.
PPTP Configuration
My IP Address
Type the (static) IP address assigned to you by your ISP.
My IP Subnet Mask
Your Prestige will automatically calculate the subnet mask based on the IP
address that you assign. Unless you are implementing subnetting, use the
subnet mask computed by the Prestige.
Server IP Address
Type the IP address of the PPTP server.
Connection ID/Name
Type your identification name for the PPTP server.
Apply
Click
Apply
to save your changes back to the Prestige.
Reset
Click
Reset
to begin configuring this screen afresh.
Table 18
PPTP Encapsulation
LABEL
DESCRIPTION