![background image](/i/line-6/137211/line-6-pod-hd-pro/h/line-6-pod-hd-pro-114.png)
Appendix B: FBV Foot Controllers
B•12
Looper Mode Footswitch Mappings
When POD HD Pro is placed in Looper Mode, several FBV footswitches change their
mappings to perform the following Looper functions. Please also see
FBV Longboard - Looper Mode Footswitch Mappings
Footswitch
Label
POD HD Pro
Looper Function
Footswitch LED
Description
REVERB
Undo
Lit briefly, while
Undo action
occurs
Erases the most recent recorded
overdub
TREMOLO
Play Once
Lit while playing
recorded loop
Plays the current recorded Loop
one time only
MODULATION
Looper Pre/Post
Lit when Looper is
in Post position
Sets the position of the Looper
“Pre” or “Post” in the signal chain
CHANNEL A
Record/Overdub
Lit when recording,
Flashes when
overdubbing
Immediately starts recording - Or, if
a loop is currently playing, overdubs
on top of the current loop
CHANNEL B
Play/Stop
Lit when playing
Toggles the recorded loop to play
and stop
CHANNEL C
Full/Half Speed
Lit when half speed Toggles the loop playback and
recording between full and half
speed
CHANNEL D
Reverse/Forward
Lit when selected
Toggles loop playback and recording
between normal and reverse
Pedal Controllers
FBV Longboard devices include two “on-board” Pedals,
PEDAL 1
and
PEDAL 2
. These
pedals are permanently mapped to the POD HD Pro
EXP 1
and
EXP 2
assignable
controllers, respectively. Please see
“Expression Pedal & Variax® Knob Controller
for how to assign these controllers to Amp & FX parameters
to customize your Presets.
It is possible to manually assign the PEDAL 1 Toe Switch to toggle Amp or FX Blocks On/
“Using the EXP Pedal Toe Switch” on page B•20
.