![background image](/i/line-6/137211/line-6-pod-hd-pro/h/line-6-pod-hd-pro-042.png)
Set Lists & Presets
4•6
FBV™ Controller A, B, C & D Channel Footswitches
With the use of some Line 6 FBV Controller device models, you can utilize Bank Up
or Bank Down
A
,
B
,
C
,
D
footswitches to navigate POD HD Pro Banks and Presets.
“Appendix B: FBV Foot Controllers” on page B•1
• Press the FBV Bank Up or Bank Down footswitch and you’ll see the Queued
Bank screen displayed, with the current Bank/Channel flashing at the top:
The Queued Bank screen - the next Bank is queued
• Continue pressing the Bank Down or Bank Up FBV footswitch and you’ll see the
previous/next Bank’s
A
,
B
,
C
&
D
Channels & their Presets “queued,” as shown
above. Then press the
A
,
B
,
C
or
D
footswitch to load the respective Preset from the
queued Bank.
Saving Presets
To retain any customization you may have performed on your Preset, or if you want to
rename or move the current Preset, you can use the Save function. Whenever your current
Preset is in an “unsaved” state, you’ll see an asterisk appear in the Signal Flow View.
Asterisk indicating Preset is in an unsaved state