Amp, Cab & Mic Models
6•10
•
Knob 1
: Changes the Bias of the power tubes. Set to minimum to achieve a very
“cold” Class AB biasing. At maximum the amp is operating in Class A.
•
Knob 2
: The Bias Excursion determines how the power amp tubes’ voicing reacts
when they are pushed hard. Set low for a tighter feel. Set high for more tube
compression. This parameter is highly reactive with the
DRIVE
&
MASTER
settings.
•
Knob 3
: Has no function on this page.
Amp Edit - Page 4
Here you’ll find Microphone and Speaker Cabinet options.
Page 4 of the AMP:EDIT Screen (appears as Page 2 for Preamp Models)
NOTE: If you selected “No Cab” for your Cab Model, these Mic and Early Reflections
settings will perform no function since no Speaker, Mic or Early Reflections processing is
applied.
•
Knob 1
: Sets the amount of “early reflections.” Higher values add more reflective
room sound to your Amp tone.
•
Knob 2
: Applies low frequency attenuation - helpful to tighten up the low end of
your tone.
•
Knob 3
: Selects the Mic type (see the Mic Model table on
).
Press the
HOME
button, or double-press the
ENTER
button to exit the
AMP:EDIT
screen
when done. Be sure to save your Preset to retain customized Amp Model settings.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
