![background image](/i/line-6/137211/line-6-pod-hd-pro/h/line-6-pod-hd-pro-019.png)
System Setup
2•9
•
Focus (Knob 3):
Increases the overall midrange.
•
Highs (Knob 4):
Attenuates the high frequencies.
•
Combo Power Amp
&
Stack Power Amp:
For connecting to the power amp of a
combo or head amp.
TIP: When using the Combo or Stack options and connecting into a tube amplifier, we also
recommend that you choose a Preamp Model from the Amp Model menu (rather than one
of the “Full” Amp Models). HD Preamp Models include no power amp emulation, making
them typically better suited for this connection. That said, there is no wrong choice! PODs
have always been about flexibility... Check out all the possibilities and decide which Models
work best for your tone!
Page 5, Setup: Digital Output Options
These options are strictly for configuring the signal fed to the 24-bit digital outputs (
S/
PDIF or AES/EBU)
. All settings are global. When connecting to another digital device,
it is best to clock the external device to follow POD HD Pro (with POD HD Pro as
the “master” device) to maintain proper synchronization - please see your digital device’s
documentation for its digital clock features.
Note: The
AES/EBU - L6 LINK
output is an XLR jack that can be used for either type
“Page 9, Setup: L6 LINK Audio” on page 2•17
). The AES/EBU
options in this screen apply only the AES/EBU output and do not affect the L6 LINK audio
signal when connected to a Line 6 DT Series amplifier.