![background image](/i/line-6/137211/line-6-pod-hd-pro/h/line-6-pod-hd-pro-130.png)
Appendix C: MIDI
C•4
The following describes the automatic MIDI messages sent when these POD HD Pro/FBV
controls are accessed when using specific gestures.
SAVE
HOLD FOR SYSTEM & I/O
VIEW
PRESETS
ENTER
DBL PRESS TO ASSIGN CTL
MOVE
AMP & FX ON / OFF
PRESETS Knob
ENTER Button
4-Way Nav. Disc
Arrow Buttons
POD HD Pro Controls that transmit Bank & Program Changes
•
Turning the PRESETS Knob:
Internally on POD HD Pro, turning clockwise and
counter-clockwise increments & decrements through Presets in the current Set List.
These actions also send the following MIDI messages:
•
Clockwise turn:
Transmits a Program Change - Increment message.
•
Counter - clockwise turn:
Transmits a Program Change - Decrement message.
•
Press FBV Footswitches A, B, C & D:
Internally this selects the respective Preset
within the current Bank. These switches also transmit MIDI Program Change -
Fixed messages, with Values from 0 to 64. The specific value is determined by the
current Bank (e.g. - for Bank 1 these four footswitches send Values 0 - 3, for Bank 2
they send Values 4 - 7, etc.)
•
Press PRESETS Knob > Press Nav. Disc Arrow Button > Press Enter Button:
Internally, this sequence calls up the Set Lists screen, selects a Set List (1 - 8)
and loads the Set List. This sequence also transmits a MIDI Bank Change - Fixed
message, with a Value of 0 through 7, respectively, when selecting Set List 1 - 8.