![background image](/i/line-6/137211/line-6-pod-hd-pro/h/line-6-pod-hd-pro-035.png)
Features & Functionality
3•7
• The FX Loop is capable of stereo, just like any stereo-output FX Model, provided
that you utilize both stereo pairs of the
SEND
&
RETURN
jacks. If you use only the
Left
SEND
or
RETURN
jack, the FX Loop signal is summed to mono.
• The above rules also apply within each of the parallel Paths A and B, since
these are each stereo signal paths as well. The Mixer Block offers Pan controls to
independently adjust the stereo balance of each of these Paths before they are fed
into the first “Post” FX (or Amp Block, if the Amp is placed here), immediately
following the Mixer.
• Please also see
“Amp Model Positioning” on page 6•1
for additional signal flow
information.
FX & Amp Block FBV Footswitch Assignment
Any of the FX and Amp Blocks can also be configured with a “FS” (Footswitch) assignment
to utilize a connected Line 6 FBV™ Controller to remotely toggle the Block’s Model On/
“Amp & FX Block Footswitch Assignment” on page B•18
It is worth noting here that, when the Setup - FS MODE option (see
) is set to “FS 5-8,” your FBV device’s
A
,
B
,
C
&
D
footswitches will
trigger the FS 5-8 assigned Blocks. To create and edit FS assignments, select the desired FX
or Amp Block within the Signal Flow View, then hold the
VIEW
button. This displays the
FS ASSIGN screen. All assignments are saved per Preset.
The Footswitch Assign screen - use Knob 1 to create or edit a Block’s FS assignment