Overview

1•1

O

verview

Welcome to the 

POD® HD Pro Advanced Guide. This guide contains in-depth details 

of the POD HD Pro features and functionality. Please be sure to also read through your 

POD HD Pro Pilot’s Handbook for basic info on POD HD Pro and this Guide will take 

it from there! In this chapter, we’ll present an overview of the main screens and features 

to get you started. 

This Guide covers POD HD Pro with Flash Memory version 2.0 (or later) installed. 
Please use Line 6 Monkey to check for and install the latest updates for your device  - see 

“Appendix A: Line 6 Monkey” on page A•1

.

Home Views

SAVE

HOLD FOR SYSTEM & I/O

VIEW

PRESETS

The place to start is in one of the Home View screens. Press the 

VIEW

 button to 

rotate through the available Home Views. While in any of these Home View 

screens, you can turn the 

PRESETS

 knob and call up a Preset in the current 

Setlist, or push the 

PRESETS

 knob to select from among other Set Lists!

Signal  Flow View

The Signal Flow View displays all Amp & FX “Blocks” and their ordering for the current 

Preset. As you’ll see in several of the following chapters, this is the screen where you’ll 

“select” the desired Block to perform other actions, such as choose a new Amp or FX 

Model, edit its parameters, move its position, and more.

Use the 

 and   Nav. 

Pad buttons to select the 
desired Block

Currently loaded Preset 
location and title

FX Blocks within 
“Pre” position

FX Blocks within 
“Post” position

Amp Blocks

Looper

Parallel Paths A (upper) 
and B (lower) with Mixer 
Block

The items within the Signal Flow View

The signal flow architecture of each Preset is comprised of 3 main sections where Amp & 

FX Blocks can be positioned: Pre, Post and parallel Paths A & B.