![background image](/i/line-6/137211/line-6-pod-hd-pro/h/line-6-pod-hd-pro-058.png)
Amp, Cab & Mic Models
6•10
•
Knob 1
: Changes the Bias of the power tubes. Set to minimum to achieve a very
“cold” Class AB biasing. At maximum the amp is operating in Class A.
•
Knob 2
: The Bias Excursion determines how the power amp tubes’ voicing reacts
when they are pushed hard. Set low for a tighter feel. Set high for more tube
compression. This parameter is highly reactive with the
DRIVE
&
MASTER
settings.
•
Knob 3
: Has no function on this page.
Amp Edit - Page 4
Here you’ll find Microphone and Speaker Cabinet options.
Page 4 of the AMP:EDIT Screen (appears as Page 2 for Preamp Models)
NOTE: If you selected “No Cab” for your Cab Model, these Mic and Early Reflections
settings will perform no function since no Speaker, Mic or Early Reflections processing is
applied.
•
Knob 1
: Sets the amount of “early reflections.” Higher values add more reflective
room sound to your Amp tone.
•
Knob 2
: Applies low frequency attenuation - helpful to tighten up the low end of
your tone.
•
Knob 3
: Selects the Mic type (see the Mic Model table on
).
Press the
HOME
button, or double-press the
ENTER
button to exit the
AMP:EDIT
screen
when done. Be sure to save your Preset to retain customized Amp Model settings.