Chapter 4 Tutorial
ZyWALL 2WG User’s Guide
108
4.2.2 Configuring the WAN Connection with a Static IP Address
The following table shows the information your ISP gave you for Internet connection.
Follow the steps below to configure your ZyWALL for Internet access using PPPoE in this
example.
Figure 44
Tutorial Example: WAN Connection with a Static Public IP Address
1
Click
NETWORK
>
WAN > WAN 1
.
2
Select
PPPoE
(
PPP over Ethernet
) from the
Encapsulation
drop-down list box.
3
In the
ISP Parameters for Internet Access
section, enter the information (such as the
user name and password) provided by your ISP. If your ISP didn’t give you the service
name, leave the field blank.
4
In the
WAN
IP Address Assignment
section, select
Use Fixed IP Address
and enter
the first fixed public IP address (1.2.3.4 in this example).
5
Click
Apply
.
Encapsulation
PPPoE
Public IP Addresses
1.2.3.4
1.2.3.5
1.2.3.6
1.2.3.7
Gateway IP Address
1.2.3.89
Subnet Mask
255.255.255.0
User Name
exampleuser
Password
abcd1234
DNS Server
1.2.1.1
1.2.1.2